ZA KFID Air

The AirGen series ZA KFID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA KFID Air can purify up to 15 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium.

The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device.

The ZA KFID Air has a very simple and efficient interface. It can also be managed by the Hydrogen series KUBE is ideal to supply Hydrocarbon free Air to FID detectors.

Main Application

  • GC-FID
  • GC-NPD
  • GC-FPD
  • GC-PFPD
  • THA
  • Gas sensing

Main advantage

  • Easy use and quick installation
  • High flow rate up to 3 L/min
  • Pressure up to 7 bar
  • RS 485 as standard
  • Purity: < 0.05 ppm THC
  • No maintenance
  • Reduced foot print
  • Stackable with KUBE
 
Models: ZA KFID Air 1.5 3.0
Zero Air Outlet
Flow rate (max) 1.5 l/min 3.0 l/min
Outlet pressure (min) Inlet pressure – 0.5 bars (8 psi) @ maximum flow
Outlet pressure (max) 6.5 bars (94 psi)
Total hydrocarbon content < 0.05ppm
Air inlet
Max inlet hydrocarbon content 100ppm
Min supply pressure 3 bars (43psi)
Max supply pressure 10 bars (145 psi)
Dew point < -20°C
Temperature (min; Max) 1°C (34°F); 35°C (95°F)
Communication
RS485 Standard
General data
Supply voltage 100-240Vac 50/60Hz
Connection type IEC320-C13
Installation power (max) 240W (280VA)
Fuse rating (5x20mm) 4A
Dimensions (WxDxH) 25x30x12 cm
Net weight < 8 kg
Connections
Outlet port 1/8" female BSPP
Inlet port 1/8" female BSPP
Water purge Threaded ISO M5 female
Operating conditions
Working Temperature 5-40°C (41-104°F)
Storage Temperature 1-50°C (34-122°F)
Humidity (max, non-condensing) 80% at 25°C (77°F)
Noise <25dB(A)
IP rating IP20
Pollution degree rating 2 (with no aromatic compounds)
Altitude < 2000m

 

Ordering codes

Gas Generators
 
6920.26.015 ZA KFID Air 1.5
6920.26.030 ZA KFID Air 3.0
Consumable
6930.00.150 Inlet filter Cartridge for ZA-FID