ZA FID Air
The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 15 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results.
High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device. The ZA FID Air has a very simple and efficient interface. It can also be managed by the HydroGen series HG PRO and HG BASIC and is ideal to supply Hydrocarbon free Air to FID detectors.
Main Applications
- GC-FID
- GC-NPD
- GC-FPD
- GC-PFPD
- THA
- Gas sensing
Main advantages
- Easy use and quick installation
- High flow rate up to 15 L/min
- Pressure up to 7 bar
- RS 485 as standard
- Purity: < 0.05 ppm THC
- No maintenance
- Reduced foot print
- Stackable with HG BASIC and HG PRO
Models: ZA FID Air |
1.5 |
3.0 |
6.0 |
15.0 |
Zero Air outlet |
||||
Flow rate (max) |
1.5 l/min |
3.0 l/min |
6.0 l/min |
15.0 l/min |
Outlet pressure (min) |
Inlet pressure – 0.5 bars (8 psi) @ maximum flow |
|||
Outlet pressure (max) |
6.5 bars (94 psi) |
|||
Total hydrocarbon content |
< 0.05ppm |
|||
Air inlet |
||||
Max inlet hydrocarbon content |
100ppm |
|||
Min supply pressure |
3 bars (43psi) |
|||
Max supply pressure |
10 bars (145 psi) |
|||
Dew point |
< -20°C |
|||
Temperature (min; Max) |
1°C (34°F); 35°C (95°F) |
|||
Communication |
||||
RS485 |
Standard |
|||
General data |
||||
Supply voltage |
100-240Vac 50/60Hz |
|||
Connection type |
IEC320-C13 |
|||
Installation power (max) |
240W (280VA) |
|||
Fuse rating (5x20mm) |
4A |
|||
Dimensions |
44x27x14(H) cm |
|||
Net weight |
< 8 kg |
< 10 kg |
||
Connections |
||||
Outlet port |
1/8" female BSPP |
|||
Inlet port |
1/8" female BSPP |
|||
Water purge |
Threaded ISO M5 female |
|||
Operating conditions |
||||
Temperature |
5-35°C (41-95°F) |
|||
Humidity (max, non-condensing) |
80% at 25°C (77°F) |
|||
Noise |
<25dB(A) |
|||
IP rating |
IP20 |
Ordering codes
Gas Generators
|
6920.25.015 ZA FID AIR 1.5 |
6920.25.030 ZA FID AIR 3.0 |
|
6920.25.060 ZA FID AIR 6.0 |
|
6920.25.150 ZA FID AIR 15.0 |
|
Consumable |
6930.00.150 Inlet filter Cartridge for ZA-FID |