NG POLLUCE
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and phthalates-free.
The generator could be equipped with a built-in oil less compressor with inverter technology. Inverter electronically control the electrical voltage, current and frequency of the compressor motor. It receives information from sensors monitoring operating conditions, and adjust the revolution speed of the compressor, which directly regulates air pressure output. Optimum control of operation frequency results in eliminating the consumption of excessive electricity and providing the most comfortable conditions to increase the compressor life-time. Thanks to the CPU with touch screen display, the continuous monitoring of operational status is guaranteed.
Main application
- LCMS
- Solvent evaporation
Main advantages
- PSA Technology
- Easy use and installation (plug and play)
- Low noise
- Generates nitrogen on demand with exclusive electronic flow control
- Low energy exclusive compressor inverter controlled
- Designed to run 24 hours a day
- Pressure up to 8 bar
- CH4 oven scrubber (option)
Technical specifications
|
Models: NG POLLUCE |
40 |
40C |
100 |
|
N2 outlet |
|||
|
Flow rate (max) |
40 L/min |
40 l/min |
100 L/min |
|
Outlet pressure (Max) |
Air Inlet pressure–2 bar |
Up to 8 bars |
Air Inlet pressure–2 bar |
|
Nitrogen purity |
Up to 99% |
||
|
Outlet Dew-point |
<-50°C |
||
|
Outlet particulate |
0.01 micron |
||
|
Air inlet |
|||
|
Air inlet requirement |
Particulate: <1 micron |
||
|
Dewpoint: < -20°C (- 4°F) |
|||
|
Oil: <0.01 mg/m³ |
|||
|
Flow rate (Max) |
100 L/min |
250 L/min |
|
|
Supply pressure (min; max) |
7 bars (95 psi)/ 10 bars (145 psi) |
||
|
Recommended Temperature |
< 30°C (86°F) |
||
|
Communication |
|||
|
LCD with touch screen |
Standard |
||
|
RS485 |
Standard |
||
|
RS232 |
Standard |
||
|
USB |
Standard |
||
|
Digital I/O |
Standard |
||
|
General data |
|||
|
Supply rating |
100-240Vac 50/60Hz |
Single phase 220-40Vac 50/60Hz |
100-240Vac 50/60Hz |
|
Connection type |
IEC320-C13 |
Cable, 3x2.5mm² |
IEC320-C13 |
|
Installation power (max) |
280W |
2.2KW |
280W |
|
Fuse rating (5x20mm) |
4A - 250VAC |
- |
4A - 250VAC |
|
Net weight |
<160Kg |
<300Kg |
<220Kg |
|
Dimensions (W x D x H) |
42 x 40 x 160 cm |
42 x 90 x 160 cm |
42 x 80 x 140 cm |
|
Connections |
|||
|
Outlet port |
¼" BSPP female |
||
|
Inlet port |
¼" BSPP female |
- |
¼" BSPP female |
|
Drain port |
Quick fitting for tube 8mm |
¼" BSPP female |
Quick fitting for tube 8mm |
|
Operating/storage conditions |
|||
|
Working Temperature |
5-40°C (41-104°F) |
||
|
Storage Temperature |
1-50°C (34-122°F) |
||
|
Humidity (max) |
70% (non-condensing) |
||
|
Noise |
<25dB(A) |
<65dB(A) |
<25dB(A) |
|
IP rating |
IP20 |
||
|
Pollution degree rating |
2 (with no aromatic compounds) |
||
|
Altitude |
< 2000m |
||
Ordering codes
|
Gas Generators |
6920.60.040 NG POLLUCE 40 |
|
6920.60.040C NG POLLUCE 40C |
|
|
6920.60.100 NG POLLUCE 100 |
|
|
Options |
6920.61.001 CH4 scrubber for NG POLLUCE (only for 40/ 40C) |
|
Consumable |
6920.61.002 Kit service 8000 hours for NG POLLUCE |
