1260 Infinity Binary LC PAD System
The 1260 Infinity Binary LC system with PAD (Pulsed Amperometric Detector) yields faster results with significantly higher data quality. Delivering a pressure of 600 bars, this system boasts flat baselines and impressive sensitivity with the Electrochemical Detector (EC), thanks to the superior gradient accuracy from high pressure mixing. Based on the highly successful 1200 Series Rapid Resolution LC System, we promise full backwards compatibility for your established HPLC and RRLC methods. The binary system supports a wide range of LC and LC/MS applications with any narrow and standard bore analytical column.
The addition of the Electrochemical Detector as an integrated Channel Partner complete solution opens the HPLC technique to unexplored sensitivity limits for specific applications where the EC technology is required.
APPLICATION AREAS
Neuroscience
-
Monoamines and Metabolites
-
GABA and Glutamate
-
Choline and Acetylcholine
-
Online MD of Monoamines
-
Glutathione and disulfides
-
Nitrotyrosine
Pharmaceutical & Biotech
-
Aminoglycoside antibiotics
-
Antipsychotic drugs
-
Azithromycin
-
Betadex Sulfobutyl Ether Sodium
-
Epinephrine in anaesthesia
-
Fluorodeoxyglucose
-
Glutathione and disulfides
-
Heparin
Clinical & Diagnostics
-
Catecholamines in Urine or Plasma
-
Serotonin in Urine or Plasma
-
Metanephrines in Urine
-
VMA HVA 5 HIAA in Urine
-
Homocysteine in Plasma
-
Fluorodeoxyglucose
-
Vitamins
-
Iodide in Urine
Food and Environment
-
EPA Phenols in water and soil
-
Bisphenol A in water
-
Polyphenols in food
-
Carbohydrates in food
-
Lactose-free products
-
Iodide in milk
Specifications Agilent 1260 Infinity Binary Pump (G1312B) and VL version (G1312C) | |
Hydraulic system | Two dual piston in series pumps with servo-controlled variable stroke drive, floating pistons |
Settable flow range | Set points 0.001 - 5 mL/min, in 0.001 mL/min increments |
Flow range | 0.05 - 5.0 mL/min |
Flow precision | ≤ 0.07% RSD or ≤ 0.02 min SD, whatever is greater; based on retention time at constant room temperature |
Flow accuracy | ± 1 % or 10 µL/min, whatever is greater; pumping degassed H2O at 10 MPa (100 bar) |
Pressure operating range | 1260 Infinity Binary Pump: Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 mL/min 1260 Infinity Binary Pump VL: Operating range up to 40 MPa (400 bar, 5880 psi) up to 5 mL/min |
Pressure pulsation | 1260 Infinity Binary Pump: < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 147 psi) Low delay volume configuration: < 5% amplitude (typically < 2 %) 1260 Infinity Binary Pump VL: < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 147 psi) |
Compressibility compensation | 1260 Infinity Binary Pump: Pre-defined, based on mobile phase compressibility 1260 Infinity Binary Pump VL: User selectable, based on mobile phase compressibility |
Recommended pH range | 1.0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel |
Gradient formation | High-pressure binary mixing |
Delay volume | 1260 Infinity Binary Pump: Standard delay volume configuration: 600 - 800 μL (includes 400 μL mixer), dependent on back pressure; measured with water at 1 mL/min (water/caffeine tracer) Low delay volume configuration: 120 µL 1260 Infinity Binary Pump VL: 600 - 900 µL (includes 400 μL mixer), dependent on back pressure |
Composition range | Settable range: 0 - 100 % Recommended range: 1 - 99 % or 5 µL/min per channel, whatever is greater |
Composition precision | < 0.15 % RSD or < 0.04 min SD, whatever is greater, at 0.2 and 1 mL/min; based on retention time at constant room temperature |
Composition accuracy | 1260 Infinity Binary Pump: ± 0.35 % absolute, at 2 mL/min, at 10MPa (100 bar), (water/caffeine tracer) 1260 Infinity Binary Pump VL: < 0.5 % absolute |
Control | Agilent control software (e.g. ChemStation, EZChrom, OL, MassHunter) |
Local control | Agilent Instant Pilot |
Communications | Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional |
Safety and maintenance | Extensive diagnostics, error detection and display through Agilent LabAdvisor, leak detection, safe leak handling, leak output signal for shutdown of the pumping system. Low voltage in major maintenance areas. |
GLP features | Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with pre-defined and user settable limits and feedback messages. Electronic records of maintenance and errors |
Housing | All materials are recyclable |
Specifications DECADE ELITE |
|
Power |
100-240 VAC, 50/60 Hz, 260 VA max., auto-sensing |
Operation modes |
DC, Pulse and Scan mode |
Potential range |
± 2.50 V, 10 mV increments |
Output (DAC) |
± 1 V (16-bit D/A converter) |
Output (I/E) |
± 2.5 V (unprocessed analog signal) |
Auto zero |
triggered by keyboard, rear panel TTL, or control software |
LAN |
instrument control, data acquisition (USB service port) |
Oven |
from +7°C above ambient to 60°C, accuracy 0.5°C, stability 0.1°C; accommodates column and flow cell(s) |
Regulatory |
CE, cMETus approved, RoHS compliant |
Rear panel I/O |
1x IEC inlet (Mains), 1x USB B, 1x RJ45 LAN, 1x 9-pins sub-d D Male (Valve), 1x 9-pins sub-d Female (Analog output), 1x 25-pins sub-d Female (Digital I/O) |
Filter |
Advanced digital filter (10 - 0.001 Hz in 1, 2, 5 increments) |
DC mode |
|
Range |
10 pA - 200 µA in 1, 2, 5 increments |
Data Rate |
1 - 100 Hz in 1, 2, 5 increments (actual data rate dependent on filter setting) |
Noise |
≤ 2 pA with dummy cell (load of 300 MΩ/0.5 µF), range 1 nA/V, filter off, Ec +800mV and temperature of 35 °C. |
Pulse mode |
|
Range |
10 nA - 200 µA in 1, 2, 5 increments |
Waveform |
5-step potential pulse (max) |
Data Rate |
1/(pulse duration) Hz |
Pulse times |
t1: 100 ms - 2000 ms; t2, t3, t4, t5: 0 - 2000 ms in 10 ms increments |
Sampling times |
ts: 20 ms to (t1 - 60 ms) |
Scan rate |
|
Range |
10 nA - 200 µA in 1, 2, 5 increments |
Data Rate |
1 Hz |
Scan rate |
1 - 100 mV/s in 1, 2, 5 increments, cycle: half, full or continuous |
Physical specifications |
|
Dimensions |
43 (D) x 22 (W) x 44 (H) cm = 16.9” (D) x 8.7” (W) x 17.3” (H) |
Weight |
max 14.4 kg (32 lbs) without flow cell and column |