1260 Infinity Quaternary LC System

Based on the most often sold quaternary HPLC system new levels of performance are brought to you. A pressure range of up to 600 bar with a flow rate up to 5 mL/min allows the use of almost any column – conventional, sub-2 µm-particle or superficially porous columns. A UV, fluorescence or ELSD detector provides the data rate required for high resolution separations or fast analyses to give you highest confidence in your analytical results. And most important, with full backwards compatibility for your established methods. Achieve better detection performance, higher resolutions, faster separations than ever before on a quaternary LC system – at an HPLC price.

  • A maximum pressure of 600 bar to utilize smaller particle size columns for higher resolution and faster separations.

  • Quaternary low pressure mixing pump design for binary, ternary or quaternary gradients. Allows easy solvent change for variable applications.

  • Unprecedented levels of DAD-performance for best and unambiguous analytical results.

  • Easy, fast and secure transfer of methods from HPLC to sub-2-micron columns.

  • Full backwards compatibility for existing methods.

  • HPLC price – RRLC performance.

  • A wide flow range up to 10 mL/min (at 200 bar) perfectly supports standard up to semi-preparative applications.

  • Upgradeability and expandability with the complete range of Agilent 1260 Infinity and 1290 Infinity LC modules.

  • Supported by all Agilent chromatographic data systems and by the Agilent Instrument Control Framework (ICF) or emulation mode by 3rd party software packages.

  • Agilent Lab Advisor Software helps you manage your lab for best chromatographic quality with intuitive diagnostic and monitor capabilities and alert functions to notify you.

 

Specifications Agilent 1260 Infinity Quaternary Pump (G1311B) and VL version (G1311C)
Hydraulic system Dual piston in series pump with servo-controlled variable stroke drive, floating pistons
Settable flow range Set points 0.001 - 10 mL/min, in 0.001 mL/min increments
Flow range 0.2 - 10.0 mL/min
Flow precision <= 0.07 % RSD or <= 0.02 min SD, whatever is greater; based on retention time at constant room temperature
Flow accuracy ± 1 % or 10 µL/min whatever is greater; pumping degassed H2O at 10 MPa
(100 bar)
Pressure operating range 1260 Infinity Quaternary pump:
Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 mL/min
Operating range up to 20 MPa (200 bar, 2950 psi) up to 10 mL/min

1260 Infinity Quaternary pump VL:
Operating range up to 40 MPa (400 bar, 5880 psi) up to 5 mL/min
Operating range up to 20 MPa (200 bar, 2950 psi) up to 10 mL/min
Pressure pulsation < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at
1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 147 psi)
Compressibility compensation User selectable, based on mobile phase compressibility
Recommended pH range 1.0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel
Gradient formation Low pressure quaternary mixing/gradient capability using high-speed proportioning valve
Delay volume 600 – 900 μL, dependent on back pressure;  measured with water at 1 mL/min (water/caffeine tracer)
Composition range 0 - 95 % or 5 - 100 %, user selectable
Composition precision < 0.2 % RSD or < 0.04 min SD, whatever is greater, at 1 mL/min; based on retention time at constant room temperature
Integrated degassing unit Number of channels: 4
Internal volume per channel: 1.5 mL
Materials in contact with solvent: TFE/PDD Copolymer, FEP, PEEK, PPS
Control Agilent control software (e.g. ChemStation, EZChrom, OL, MassHunter)
Local control Agilent Instant Pilot
Communications Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
Safety and maintenance Extensive diagnostics, error detection and display through Agilent LabAdvisor, leak detection, safe leak handling, leak output signal for shutdown of the pumping system. Low voltage in major maintenance areas.
GLP features Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with pre-defined and user settable limits and feedback messages. Electronic records of maintenance and errors
Housing All materials are recyclable