1260 Infinity Isocratic LC System
The Agilent 1260 Infinity Isocratic LC system is a workhorse for the demanding needs of QA/QC and other routine applications. Delivering high performance and low cost HPLC capabilities, the 1260 Isocratic system provides wide flow and power ranges and an 80 Hz UV detection data rate. The system has a robust, future-proof modular design making it an ideal starter solution with a sophisticated upgrade path. Full programming capability is provided and a variety of built-in self-test routines and test methods are included for effective maintenance. The unmatched ruggedness, reliability and numerous built-in productivity features deliver state-of-the-art hardware in a small footprint package.
-
Rugged design that facilitates high uptime and delivers consistent results for low operation and maintenance costs.
-
A modular, future-proof design with an upgrade path to a quaternary system and allowing effective combination with many 1200 Infinity Series modules.
-
Wide power range with system pressures of up to 600 bar achieved at flow rates of 5 ml/min for modern LC columns.
-
Wide flow range of up to 10 mL/min (at 200 bar) that enables semi-preparative separations.
-
An 80 Hz UV detection data rate is utilised.
-
Instructions for installation, performance verification, operation, preventive maintenance and system suitability testing are supplied on CD with video tutorials for typical maintenance procedures.
-
Early maintenance feedback (EMF) allows you to track continuously the long-term instrument usage.
-
Easy front access to all maintainable parts for fast exchange without the need to disassemble the instrument.
-
Built-in self-test routines, logbooks and pre-programmed test methods help identify problems fast and task-oriented online help for QA/QC operation is available.
-
Full programming capability is provided, such as intelligent method sequencing which includes built-in shutdown methods that help reduce solvent costs and prolong column lifetime.
-
High sensitivity variable wavelength detector with minimum baseline noise for lowest detection limits, fully programmable wavelength switching for selectivity optimized to each analyte's elution, and stop-flow wavelength scanning for fast wavelength optimization.
-
Agilen Lab Advisor Software assists the management of your lab for the highest chromatographic quality and intuitive diagnostic, monitoring and alert capabilities to easily identify any issue.
Specifications Agilent 1260 Infinity Isocratic Pump (G1310B) |
|
Hydraulic system |
Dual piston in series pump with servo-controlled variable stroke drive, floating pistons |
Settable flow range |
Set points 0.001 - 5 mL/min, in 0.001 mL/min increments |
Flow range |
0.2 - 10.0 mL/min |
Flow precision |
<= 0.07 % RSD or <= 0.02 min SD, whatever is greater; based on retention time at constant room temperature |
Flow accuracy |
± 1 % or 10 µL/min whatever is greater, pumping degassed H2O at 10 MPa (100 bar) |
Pressure operating range |
Operating range up to 60 MPa (600 bar, 8700 psi) up to 5 mL/min |
Pressure pulsation |
< 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min isopropanol, at all pressures > 1 MPa (10 bar, 147 psi) |
Compressibility compensation |
User selectable, based on mobile phase compressibility |
Control |
Agilent control software (e.g. ChemStation, EZChrom, OL, MassHunter) |
Local control |
Agilent Instant Pilot |
Communications |
Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional |
Safety and maintenance |
Extensive diagnostics, error detection and display through Agilent LabAdvisor, leak detection, safe leak handling, leak output signal for shutdown of the pumping system. Low voltage in major maintenance areas. |
GLP features |
Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with pre-defined and user settable limits and feedback messages. Electronic records of maintenance and errors |
Housing |
All materials are recyclable |