1260 Infinity Multiple Wavelength Detector
Real multiple wavelength detection for ultrafast LC
The 1260 Infinity Multiple Wavelength detector (MWD) will simultaneously detect up to eight compound-specific wavelengths which gives you optimum selectivity over a wavelength range from 190 nm to 950 nm. The improved diode array design greatly reduces detector noise (<± 7 µAU) for precise quantification of trace compounds, regardless of how many signals are recorded. High-speed UV detection with up to 80 Hz data rates keeps pace with the analysis speed of fast LC
-
Higher sensitivity and selectivity - simultaneous detection of up to eight compound-specific wavelengths
-
Low detection limits - low noise front-end electronics and the patented flow cell design delivers very low detection limits thanks to the minimization of short-term noise (< ± 7 μAU).
-
Up to 100% resolution gain in fast LC - using an 80 Hz data acquisition rate.
-
Maximum baseline stability - electronic temperature control (ETC) reduces baseline drift under fluctuating ambient temperature and humidity conditions.
-
Wide linear range - for reliable, simultaneous quantification of primary compounds, by-products and impurities.
-
Programmable slit (1 to 16 nm) for rapid optimization of sensitivity and linearity.
-
Excellent data security and traceability - data is saved to the new data recovery card (DRC) and radio frequency identification (RFID) tags on cells and source lamps improve traceability of data.
-
Automatic wavelength verification by built-in holmium oxide filter.
-
Nine analytical and preparative flow cells provide you with maximum application flexibility and choice.
-
Extensive diagnostics, error detection and display with 1200 Infinity Series Instant Pilot controller and Lab Advisor software.
Specifications: 1260 Infinity Multiple Wavelength Detector (G1365C |
|
Detector type |
1024-element diode array |
Light source |
Deuterium and tungsten |
Number of signals |
8 |
Maximum sampling rate |
80 Hz |
Short-term noise |
± 0.7 x 10 -5 AU at 254/4 nm and at 750 nm, TC 2 sec. |
Drift |
< 0.9 x 10-3 AU/hr at 254 nm |
Linearity |
> 2.0 AU (5 %) at 265 nm |
Wavelength range |
190-950 nm |
Wavelength accuracy |
± 1 nm, self-calibration with deuterium lines |
Slit width |
Programmable: 1, 2, 4, 8, 16 nm |
Diode width |
< 1 nm |
Wavelength bunching |
Programmable, 2 - 400 nm, in steps of 1 nm |
Flow cells |
Standard |
Time programmable |
Wavelength, polarity, peak width, lamp bandwidth, autobalance, wavelength range, threshold, spectra storage mode |
Analog output |
Recorder/integrator: 100 mV or 1 V, 2 outputs |
Communications |
LAN, Controller-area network (CAN), |
GLP features |
Data recovery card to prevent data losses. RFID for electronics records of flow cell and UV lamp conditions (path length, volume, product number, serial number, test passed, usage) |
Safety and maintenance |
Extensive diagnostics, error detection and display through Agilent Instant Pilot and Agilent Lab Advisor software. Leak detection, safe leak handling, and leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. |
Others |
Electronic temperature control (ETC) for the complete optical unit |
Specifications:1260 Infinity Multiple Wavelength Detector VL (G1365D) |
|
Detector type |
1024-element diode array |
Light source |
Deuterium and tungsten |
Number of signals |
8 |
Maximum sampling rate |
20 Hz |
Short-term noise |
± 0.7 x 10 -5 AU at 254/4 nm and at 750 nm, TC 2 sec. |
Drift |
< 0.9 x 10-3 AU/hr at 254 nm |
Linearity |
> 2.0 AU (5 %) at 265 nm |
Wavelength range |
190-950 nm |
Wavelength accuracy |
± 1 nm, self-calibration with deuterium lines |
Slit width |
Programmable: 1, 2, 4, 8, 16 nm |
Diode width |
< 1 nm |
Wavelength bunching |
Programmable, 2 - 400 nm, in steps of 1 nm |
Flow cells |
Standard |
Time programmable |
Wavelength, polarity, peak width, lamp bandwidth, autobalance, wavelength range, threshold, spectra storage mode |
Analog output |
Recorder/integrator: 100 mV or 1 V, 2 outputs |
Communications |
LAN, Controller-area network (CAN), |
GLP features |
RFID for electronics records of flow cell and UV lamp conditions (path length, volume, product number, serial number, test passed, usage) |
Safety and maintenance |
Extensive diagnostics, error detection and display through Agilent Instant Pilot and Agilent Lab Advisor software. Leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. |
Others |
Electronic temperature control (ETC) for the complete optical unit |