ZA-HC free & ZA-Total Ultra Pure

The AirGen series ZA-HC is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. If higher purity is requested, then the ZA-Total will also remove other pollutant like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons.

Very small in size, the ZA-HC & ZA-Total can filter up to 30 L/min of compressed Air and can withstand a pressure up to 7 bar (101 PSI). The reduction of hydrocarbons, including methane, and carbon monoxide, decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. The hydrocarbons and CO are removed with a catalytic oven filled with palladium. Humidity and CO2 is removed with a dual molecular sieve PSA system, NO is removed with Purafil. And other components are removed with an active charcoal filter.

 

Characteristics

  • Easy use and installation
  • High flow rate up to 7 bar
  • Purity: <0,1 ppm THC
  • Purity*: <0,1 ppm CO NOx SO2
  • Purity*: <5 ppm CO2
  • No maintenance
  • Reduced foot print

*ZA-total only

Available Flow rates

1.5

3.0

6.0

15

30

Outlet pressure

Up to 7 bar (101 PSI) (need external compressed Air)

Air purity ZA-HC

THC < 0.1 ppm

Air purity ZA-Total

CO NOx SO2 < 0.1 ppm

 

CO2 < 5ppm/ H2O < 100ppm (-40°C DP)

Inlets/ Outlets fitting

1/4” Swagelock

Filters

Inlet dust filter included

Start-up time

45 min

Inlet Air requirement

3 bars (43 psi)/ THC < 100ppm/ DP <-20°C

Dimensions (WxDxH)

45x20x36,50cm (filters excluded)

Net Weight

20 Kg to 30Kg depending of Model and options

Power supply

230V/ (50Hz or 60Hz) or 115V/ 60Hz

Power consumption

250W