HG ST PRO
The HydroGen series HG ST PRO is able to generate up to 300 cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). An optional AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min.
The HG ST PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free.
The HG ST PRO is the ideal Hydrogen and Air Generator for all GC-FID detectors. The on-board CPU constantly control the operating parameters to guarantee full safety. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.
Main Applications
- Carrier gas for GC and GC-MS
- GC-FID / GC-NPD / GC-FPD
- THA
- Gas sensing
Main Advantages
- Quick installation
- Easy use
- Hydrogen flow rate up to 300 cc/min
- ZeroAir flow rate up to 2000 cc/min
- Pressure up to 16 bar (232 psi)
- Hydrogen purity: 99.99999%
- THC: < 0.1 ppm
- RS 485 and USB as standard
- LAN optional
- Dryer with no maintenance
- Reduced foot print
- High pressure GLS electronically controlled (patented)
|
Models: HG 2U PRO |
100 |
160 |
250 |
300 |
|
General data |
||||
|
Electrolytic cell |
PEM technology |
|||
|
Drying system |
PSA (Pressure Swing Adsorption) |
|||
|
H2 purity |
>99.99999% * |
|||
|
Outlet pressure |
12 bars (174 psi) / 16 bars (232 psi) (optional) |
|||
|
H2 flow-rate cc/min (Max) |
100 |
160 |
250 |
300 |
|
Dimensions (WxHxD) |
9.5 x 44 x 48 cm |
|||
|
Net weight (no water in tank) |
18.5 kg |
|||
|
Communication |
||||
|
RS485/USB |
Standard |
|||
|
LAN |
Optional |
|||
|
Software functions |
||||
|
Parallel mode |
Ready on board |
|||
|
Automatic tank refill |
Standard |
|||
|
Water |
||||
|
Quality |
Deionized, ASTM II, <0.1uS |
|||
|
Supply pressure (min, Max) |
-0.2 bars (1.4 psi), 0.5 bar (7.25 psi) |
|||
|
Internal tank capacity |
0.3 l |
|||
|
Electrical data |
||||
|
Type of connection |
IEC 320-C13 |
|||
|
Power supply voltage |
100-240 Vac 50/60 Hz |
|||
|
Installed power (Max) |
350W |
|||
|
Fuse rating (5x 20 mm) |
4A 250VAC |
|||
|
Connections |
||||
|
Hydrogen outlet |
1/8” compression fitting |
|||
|
Water (inlet, drain) |
Quick release push-in fitting |
|||
|
ZeroAir section (optional) |
||||
|
Inlet pressure (Max) |
8 bars (116 psi) |
|||
|
THC (Inlet Air) |
100ppm |
|||
|
Outlet flow rate (max) |
2000 cc/min |
|||
|
Outlet pressure (max) |
Inlet pressure – 0.5 bars (8 psi) at maximum flow |
|||
|
THC (ZeroAir Outlet) |
<0.1ppm |
|||
|
Inlet, Outlet ports |
1/8″ BSPP female |
|||
*Referred to O2 – DewPoint < -75°C
Ordering codes
|
Gas Generators |
6920.06.010 HG ST PRO 100 |
|
6920.06.016 HG ST PRO 160 |
|
|
6920.06.025 HG ST PRO 250 |
|
|
6920.06.030 HG ST PRO 300 |
|
|
Accessories (optionals) |
6930.00.120 ZA 2U (catalyst) |
|
Consumable |
6930.00.050 De-ionisation Cartridge |
