BlueShadow Pump 40P
The BlueShadow pump 40P was designed to provide exceptionally precise and reliable solvent delivery for a wide range of HPLC applications in quality control and testing as well as research and method development.Two exchangeable pump heads allow a wide range of flow rates with one pump. Practically pulse-free flow is achieved by our enhanced smart drive control which actively prevents pressure ripple instead of just dampening it. The improved design also ensures a low dead volume. The BlueShadow pump 40P is available in two different versions, either the pump only or fully developed with mixing chamber and low pressure gradient module.The pump can deliver flows at pressures in differents ranges
Key features
-
Isocratic analytical HPLC pump offers wide range of flow rates (0.001-10 ml/min)
-
Flexible 1/16“ capillaries
-
Pump version for biocompatible applications
-
Integrated compressibility compensation
Different types of pump:
-
BlueShadow Pump 40P with 10 ml pump head, ceramic
-
BlueShadow Pump 40P with 10 ml pump head, ceramic, LPG, mixer (The quaternary pump contains one high pressure pump (700 bar) and an integrated LPG mixing block with a 4 inlet proportioning valve a low-volume mixer)
-
BlueShadow Pump 40P with 10 ml pump head, stainless steel, optimized for normal phase applications
-
BlueShadow Pump 40P with 10 ml pump head, stainless steel
-
BlueShadow Pump 40P with 10 ml pump head, stainless steel, LPG, mixer
-
BlueShadow Pump 40P with 50 ml pump head, ceramic
-
BlueShadow Pump 40P with 50 ml pump head, stainless steel
|
Pump type |
Isocratic HPLC pump Quaternary HPLC pump Quaternary HPLC pump with degasser |
|
Solvent delivery |
|
|
Pump head |
10 ml/min 50 ml/min |
|
Pulsation compensation |
active pressure and pulsation compensation |
|
Pump head materials |
Ceramic Stainless Steel |
|
Maximum delivery pressure (depend of the model) |
40 MPa (400 bar, 5800 psi) 70 Mpa (700 bars, 5800 psi) until 5ml/min, 30 Mpa (300 bars, 4351 psi) until 10 ml/min 20 MPa (200 bars, 2900 psi) |
|
Flow rate range (depend of the model) |
0.001 - 10 ml/min/ 0.02 - 10 ml/min 0.02 - 50 ml/min / 0.01 - 40 ml/min |
|
Flow rate increment (depend of the model) |
0.001 ml/min or 0.01 ml/min |
|
Flow rate accuracy |
± 1%, measured at 5 - 80% of flow range using ethanol |
|
Flow rate precision |
< 0.1 % RSD based on retention time at constant room temperature |
|
Pulsation |
< 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures > 1 MPa (10 bar, 147 psi) |
|
Piston seal washing |
standard |
|
System protection |
soft start, Pmin and Pmax are programmable |
|
Wetted materials |
graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminium oxide (Al2O3), zirconium oxide (ZrO2) |
|
Communication |
|
|
Control |
LAN, RS-232, analog and event controlled |
|
Analog inputs |
0-10 V |
|
Analog control input |
flow rate |
|
Technical parameters |
|
|
Ambient conditions |
temperature range: 10-40°C; 50-104°F air humidity: below 90 % humidity (non condensing) |
|
General |
|
|
Power supply |
voltage range: 100 - 240 V, 50 - 60 Hz |
|
Dimensions |
242 x 165 x 399 mm (W x H x D) |
|
Weight |
6.1 kg |
