1260 Infinity Binary Pump
The Agilent 1260 Infinity Binary Pump is designed to give outstanding performance in both rapid resolution LC and HPLC. The system has been developed for applications with RRHT 1.8 µm particle size column technology using columns with an inner diameter of 2.1mm and is also ideally suited for standard HPLC using 4.6 and 3 mm id columns. Gradient formation is based on a high pressure mixing principle and delay volumes (standard or low) can be easily configured by the operator. The Agilent 1260 Infinity Binary Pump is the pump of choice for reproducible gradients and high performance providing high-throughput and fast separations including the use of STM column technology. For applications where high speed and resolution with uncompromised data quality are required, this is the pump of choice.
-
Configurable delay volume down to 120 µL together with a flow range up to 5 mL/min provides universal applicability.
-
RRLC performance at a HPLC price.
-
Fast and easy change from standard to low delay volume configuration is enabled.
-
High gradient performance even at low % B and narrow-bore flow rates.
-
Electronic damping control creates low baseline noise.
-
The pump is the perfect choice for fast and precise gradients using LC/MS, as well as UV-only systems.
-
Fully exploits the speed and separation potential of ZORBAX Rapid Resolution HT.
Specifications Agilent 1260 Infinity Binary Pump (G1312B) and VL version (G1312C) |
|
Hydraulic system |
Two dual piston in series pumps with servo-controlled variable stroke drive, floating pistons |
Settable flow range |
Set points 0.001 - 5 mL/min, in 0.001 mL/min increments |
Flow range |
0.05 - 5.0 mL/min |
Flow precision |
≤ 0.07% RSD or ≤ 0.02 min SD, whatever is greater; based on retention time at constant room temperature |
Flow accuracy |
± 1 % or 10 µL/min, whatever is greater; pumping degassed H2O at 10 MPa |
Pressure operating range |
1260 Infinity Binary Pump: |
Pressure pulsation |
1260 Infinity Binary Pump: |
Compressibility compensation |
1260 Infinity Binary Pump: |
Recommended pH range |
1.0 - 12.5, solvents with pH < 2.3 should not contain acids which attack stainless steel |
Gradient formation |
High-pressure binary mixing |
Delay volume |
1260 Infinity Binary Pump: |
Composition range |
Settable range: 0 - 100 % |
Composition precision |
< 0.15 % RSD or < 0.04 min SD, whatever is greater, at 0.2 and 1 mL/min; based on retention time at constant room temperature |
Composition accuracy |
1260 Infinity Binary Pump: |
Control |
Agilent control software (e.g. ChemStation, EZChrom, OL, MassHunter) |
Local control |
Agilent Instant Pilot |
Communications |
Controller-area network (CAN), RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional |
Safety and maintenance |
Extensive diagnostics, error detection and display through Agilent LabAdvisor, leak detection, safe leak handling, leak output signal for shutdown of the pumping system. Low voltage in major maintenance areas. |
GLP features |
Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with pre-defined and user settable limits and feedback messages. Electronic records of maintenance and errors |
Housing |
All materials are recyclable |